Thenewold
08-06-2018, 09:38 PM
My first Altec project are these 40+ year old A8's.
81949
The cabinets and low freq drivers - 416-16c - are original. I'm running Great Plains Audio 909-16's in place of the original HF drivers.
81948
The stock N800F networks are in good condition, but I thought I'd see what I could do with some of the caps and parts I had, along with some new parts, in a new build. I used Duelund tinned copper 16awg and 20awg internally as well.
I used this design:
81945
I used these parts:
81946
It's been exactly one year since I built them, and just this week I feel they are settled in properly. The speakers sounded dull and slower than they should for quite a while. I didn't have the Altec in my space the entire time - they sat in storage for some time - so, it took this long.
I must say, they now sound better than I'd hoped. I'm running a Toolshed Amps Euphoria stereo amp with 2A3's, and in my small (11'x13') space the A8's are sounding lovely. The room isn't ideal, but I was able to dial them in despite the size.
81949
The cabinets and low freq drivers - 416-16c - are original. I'm running Great Plains Audio 909-16's in place of the original HF drivers.
81948
The stock N800F networks are in good condition, but I thought I'd see what I could do with some of the caps and parts I had, along with some new parts, in a new build. I used Duelund tinned copper 16awg and 20awg internally as well.
I used this design:
81945
I used these parts:
81946
It's been exactly one year since I built them, and just this week I feel they are settled in properly. The speakers sounded dull and slower than they should for quite a while. I didn't have the Altec in my space the entire time - they sat in storage for some time - so, it took this long.
I must say, they now sound better than I'd hoped. I'm running a Toolshed Amps Euphoria stereo amp with 2A3's, and in my small (11'x13') space the A8's are sounding lovely. The room isn't ideal, but I was able to dial them in despite the size.