PDA

View Full Version : 2405 seals



majick47
12-19-2004, 04:22 PM
Noticed the white seals that go on the square base of my 2405 tweeters are missing, might still be at the JBL pro shop but if thet arn't I have the Parts Express 3/8 foam "weatherstripping" that I was planning on useing on all my components going into my L200b speakers. Will the Parts Express "weather stripping" be a good substitute for the 2405 white seals? I'm guessing the seals are used to make a air tight seal between the 2405 tweeter and the baffle board. The 3 1/8" cutouts for the 2405 tweeters is a perfect fit. The cut is very clean and in fact smoother then the factory cuts for the LE85 and 136A.

Zilch
12-19-2004, 05:23 PM
The "noodle" is available for purchase, no doubt.

Weatherstrip will work as well, just not as "nifty" as the noodle. :)

http://www.jblproservice.com/pdf/Discrete%20Sales%20Models/2405H.pdf

majick47
12-19-2004, 09:28 PM
Thanks Zilch for the info re the 2405 noodles/gaskets. The JBL tech probably forgot to put them back on the tweeters and if they got misplaced I'll have him order a couple new ones. Figured they acted as gaskets and the Parts Expess weather stripping on all the components should make for a tight seal to the baffleboard. Hope to have all my updated L200b components back from the JBL pro shop this week and playing the best Christmas tunes ever.