PDA

View Full Version : 3114 questions



bldozier
03-22-2017, 07:52 AM
hi
i have been making nice progress on the 4315 project
locating all drivers and a pair of 3114a networks
would love an original canine set if one is out there...


so, I noticed that the metal screen onto of the network
is brushing some parts inside the network. Should I be con -
cearned? Also my serials are not consecutive
15540 -A / 12022-A, these are both full recaps.

The lpad plates are also different hues and one
is without the foam rings. I need a tight seal, anyone
knoe where to find the foam.

76405764067640776408

bldozier
03-29-2017, 06:57 AM
Any help

bldozier
11-06-2017, 12:48 PM
can anyone tell me what part this is the huge metal part in that picture of what i think
to be the 3114 network is that a ironcore

78912

Chevelle
11-06-2017, 11:26 PM
The 72uF electrolytic cap in the low path.

Challenger604
11-07-2017, 08:36 AM
Hey bldozier! Can you pay your debt to Larry?

bldozier
11-10-2017, 12:41 AM
i have reach out to him to resolve the debit owed to him. thank you.

bldozier
11-10-2017, 01:05 AM
The 72uF electrolytic cap in the low path.

thank you,
so the coil is the black piece next to it?
is mm also mh

bldozier
11-20-2017, 07:14 AM
79040

here i've gotten the original caps from the seller of the 3114, i've purchased. The original caps were included in
the sale but not included when i received that 3114, i wanted to have them in case i was not completely satisfied,
with the performance of the recapped network, i can revert to the original...