PDA

View Full Version : l88pcrossover to l100 whats needed



sounddog
03-08-2017, 08:17 AM
hello, I have a pair l88p, I want take this 2-way crsovr convert it l100 crsovr, do i just add l-pad and cap,for mids identical to l100 crsovrs, but need drawing to this, help would be greatfull.

Odd
03-08-2017, 08:30 AM
L 88

sounddog
03-08-2017, 09:33 AM
thanks, would you know anything regarding the m12 kit the midrange box, what was inside. 88p midrange is pre wired, no need to open cab,just install le5, plug in mid box to spkr terminals that's it. would like to build that box, rather then open cab, never found drawings of this any, reminds me of a jbl speaker I once owened had a energizer amp, I used some sort of resistor hooked to my receiver speaker output then to the amp
L 88

Odd
03-08-2017, 10:20 AM
I do not have much knowledge about L88.
You can read a bit here.

All the LE5 models require a subenclosure (http://www.audioheritage.org/vbulletin/showthread.php?9331-JBL-LE5-2-in-LE5-2)

Earl K
03-08-2017, 02:46 PM
76292
http://www.audioheritage.org/vbulletin/attachment.php?attachmentid=18291&stc=1&d=1157698865

- Unsure about what that connector is ( seems like an old DIN type (https://en.wikipedia.org/wiki/DIN_connector) ) .
- The metal box looks to be a variant & about the same size as a LX4-2 network ( which you might get cheap on the bay ).

:)