Jbl 4648 + 2360a

[alnico]

Hi,

I have 4648 (4508) matched with 2360A on top of them. The front of the horn 2360A naturally exceeds the front of the 4648 of about 6 to 8 inches. If I move my horns 2360A backwards so the front is aligned with the 4648, will it impact the sound?

Will it have an impact on the phase of the speakers?

Thanks!

[Lee in Montreal]

Ideally, diaphragm and cone shall be aligned. Which is not physically possible. You may want to add some delay to the woofers.

[alnico]

thanks Mr.Lee

Indeed, the driver of the 2360 is very backward, even in normal position.
So I was wondering if I was going back another 8 inches if the sound output would be affected

[Lee in Montreal]

thanks Mr.Lee

Indeed, the driver of the 2360 is very backward, even in normal position.
So I was wondering if I was going back another 8 inches if the sound output would be affected

Not being aligned, sources will not give their optimal. Will you perceive it? It depends on your ears. I have a digital crossover and realigned them.

Lee

[alnico]

Not being aligned, sources will not give their optimal. Will you perceive it? It depends on your ears. I have a digital crossover and realigned them.

Lee

yess , i have digital crossover DBX PA-2 driverack

[kris90]

Salut Richard!!!:D