View Full Version : 4628 enclosure
Dr.db
01-18-2017, 09:37 AM
Hey,
does anyone know the internal volume and port dimension (lenght & diameter) ?
Thanks a lot,
Olaf
grumpy
01-18-2017, 09:57 AM
If no one else responds, happy to measure later tonight.
Dr.db
01-18-2017, 10:26 AM
That would be very kind, thank you in advance!
The internal volume should be 4,5 ft³ according to the JBL literature, but I can´t find anything about the ports ;)
Dr.db
01-18-2017, 12:46 PM
Thanks a lot so far ;)
Flodstroem
01-18-2017, 01:50 PM
Olaf, If you missed this thread I post the link here:
http://www.audioheritage.org/vbulletin/showthread.php?33159-Which-one-is-the-best-pro-quot-box-quot-that-could-be-moved-into-your-home-for-hi-fi-use
Dr.db
01-18-2017, 02:10 PM
Thanks a lot.
grumpy
01-18-2017, 07:05 PM
External (ignoring corners and rear skids):
19.5x29.5x18.5" (WxHxD)
Internal (noting baffle is inset):
18.0x28.0x14.875"
2118H doghouse (subtract from calc volume):
9x8x6"
port:
6" dia
5.5" depth (rear of duct to front baffle)
all above dimensions to <1/16" accuracy
... so perhaps closer to 4.0ft3
there are at least two braces (one vertical, flat on back, perhaps 2" wide and 1/2" deep
and a smaller cross brace (front to back) that also supports the doghouse. I doubt they
are significant re volume calc ... esp when fiberglass (top/bottom/sides) is figured in.
Dr.db
01-19-2017, 02:54 PM
Thank you so much, you´re a big help!
Looks like a 40hz tuning with a gentle roll of below 100hz...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.