View Full Version : JBL aluminum dust cap help!
retro soulman
08-25-2016, 03:20 AM
Today i came back home and i saw one of my k140 woofers dust cap with a nice dent... Damn! I try to suck it out with no success! The problem is that i have already change this dust cap with the aftermarket 4" and 1/8 so i dont know what to do with the next aftermarket 4" 1/8 dustcap... Any ideas? The only good thing is that i didn't add much glue when i add the dustcap so maybe this will help some..
Ruediger
08-25-2016, 07:13 AM
I have changed an E140's dustcap and have posted the procedure. See the following link.
http://www.audioheritage.org/vbulletin/showthread.php?26529-E-140-dust-cap-replacement-advice-please
Ruediger
JeffW
08-25-2016, 07:44 AM
I'd just leave it unless it can be determined that whatever caused it to be pushed in wouldn't happen again.
badman
08-25-2016, 11:02 AM
A pin or paperclip shaped into an L can be inserted through a small hole to gently shape it back to normal from the inside, IF a loop of tape doesn't work. A tiny dab of epoxy can seal it back up.
ARMED
08-25-2016, 01:04 PM
duck tape!!!!
cut a little piece, stick it on there then pull it out! gently!
(thats what she said)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.