View Full Version : Help with crossover
ljungberg
07-01-2015, 03:37 AM
Hi,
New to this forum. I have searched the forum but have not found anything about this setup:
Iīm in the building process of a pair of loudspeakers. Each speaker will have as follow:
1 pcs of GPA 416-8c
1 pcs of GPA 902-8a
I will not use the traditional B511 horn. Instead I will use a waveguide called Seos-15 (http://www.horns-diy.pl/seos15.html)
My enclouse will be built like the Viso 4-8-5 (http://digilander.libero.it/steveviso/audiogarage/viso485e.html#cassa)
Any suggestions how the filters should look like with the waveguide? I woud like to have the benefit to adjust the H.F level on the crossover.
Best regards
J
gcarlberg
07-01-2015, 06:30 AM
This would be my suggestion;
http://www.audioheritage.org/vbulletin/showthread.php?18913-Altec-9844-8B&p=197971&viewfull=1#post197971
http://www.audiokarma.org/forums/showthread.php?t=328530
george
ljungberg
07-01-2015, 07:05 AM
Any suggestions to this filter? Ok or?
ivica
07-01-2015, 07:41 AM
Any suggestions to this filter? Ok or?
Hi ljungberg,
I think that only -6dB/oct network would not be enough secure solution for the VHF driver, so I would suggest to start from the ALTEC solution
http://www.audioheritage.org/vbulletin/showthread.php?18913-Altec-9844-8B&p=197971&viewfull=1#post197971
regards
ivica
ljungberg
07-01-2015, 07:54 AM
Hi ljungberg,
I think that only -6dB/oct network would not be enough secure solution for the VHF driver, so I would suggest to start from the ALTEC solution
http://www.audioheritage.org/vbulletin/showthread.php?18913-Altec-9844-8B&p=197971&viewfull=1#post197971
regards
ivica
Thanks,
Much appreciated. I have my thumb in the middle of the hand when It comes to the electrical stuff.
Regards
J
ljungberg
07-04-2015, 09:09 AM
Does anyone have a complete scheme how a 604 duplex filter looks like?
I recieved my drivers and woofers today. I Went for Altec Lansing 802-8g drivers and 416-8a woofers.
The GPA elements was to expensive to ship.
The previous owner didnīt like the model 19 filter and prompted for a duplex filter instead. Any comments about that?
ivica
07-05-2015, 06:43 AM
Does anyone have a complete scheme how a 604 duplex filter looks like?
I recieved my drivers and woofers today. I Went for Altec Lansing 802-8g drivers and 416-8a woofers.
The GPA elements was to expensive to ship.
The previous owner didnīt like the model 19 filter and prompted for a duplex filter instead. Any comments about that?
http://home.earthlink.net/~jmarkwart/sitebuildercontent/sitebuilderfiles/604-8h_gsmpl.pdf
ivica
ljungberg
07-05-2015, 07:24 AM
http://home.earthlink.net/~jmarkwart/sitebuildercontent/sitebuilderfiles/604-8h_gsmpl.pdf
ivica
Thanks,
What is the difference between this filter an a N801-8A?
ljungberg
07-07-2015, 01:35 PM
Building up new 800 crossovers from scratch
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.