PDA

View Full Version : 3110 suitable ?



Dr.db
06-26-2015, 04:16 AM
Hey folks,


I´m wondering if a 3110 crossover would be the best match for my 2440 (16ohms) and E-145 (8ohms) ?
They need a 800hz cutoff....
http://www.jblproservice.com/pdf/Network%20Schematics/3110%20Network.pdf
http://www.jblpro.com/pub/obsolete/Frequency_Dividing_Networks1.pdf

JBL says 16ohms for the compression driver :)
But Lowfreq. is 8-16ohms, do I have to change anything when using the E-145/8 ?

I will be bi-amping my system, so E-145 and 2440 each will have a separate amplifier... So no need for sensitivity alignment by reducing HF with resistors!!
But can I simply drop all resistors of the 3110 without changing the crossover-frequencies ?
Do these resistors only change volume or do they actually affect other parameters ?


Could I rebuild the crossover like this:

E-145: 3,3mh inductor + 25,5mf caps
2440: 9mf caps + 2,14mh inductor



Thanks a lot for your help,
Olaf