uenjoymyself
03-30-2015, 06:42 PM
Hello all,
This is my first post at Lansing heritage and my first audio project ever so please excuse my lack of knowledge and use of terminology. The crossovers pictured are a rebuild done by Baron030 here at LH. I have traced the resistor legs with red lines in the configuration I believe to be correct.
Per the Schematic
Am I seeing this correctly?
Pic One> One end of both resistors twisted together then split to connect to green lpad #4 terminal and red floating terminal to lpad.
pic two> Other end not twisted or touching and connected one leg to neg input terminal and one leg to floating terminal to capacitor. (shouldnt matter which leg goes to which if the opposite end is twisted?)
Pic three> Floating terminal (my definition indicated by red dot and line)= they are not connected (electrically) to their counter part (red dot) held by #4 screw and Neg input screw. Correct?
I hope this is discernible
Thank you!
and please, again, excuse my noob questions and descriptions! :blink:
P.S. Title JBL N2400 network resistor placement
This is my first post at Lansing heritage and my first audio project ever so please excuse my lack of knowledge and use of terminology. The crossovers pictured are a rebuild done by Baron030 here at LH. I have traced the resistor legs with red lines in the configuration I believe to be correct.
Per the Schematic
Am I seeing this correctly?
Pic One> One end of both resistors twisted together then split to connect to green lpad #4 terminal and red floating terminal to lpad.
pic two> Other end not twisted or touching and connected one leg to neg input terminal and one leg to floating terminal to capacitor. (shouldnt matter which leg goes to which if the opposite end is twisted?)
Pic three> Floating terminal (my definition indicated by red dot and line)= they are not connected (electrically) to their counter part (red dot) held by #4 screw and Neg input screw. Correct?
I hope this is discernible
Thank you!
and please, again, excuse my noob questions and descriptions! :blink:
P.S. Title JBL N2400 network resistor placement