Crossover Assembly Question

[Barry H]

Hi,
Just finished the Nelson Pass L300 crossover for my latest speaker project. I assembled the crossover exactly as i see it on the schematic, with R3,R4,C4,L2,L3 soldered to a common point. On the original L300 schematic it shows a 1.5uf cap after the 0.3mh coil. On NP xo he shows a 2.2 cap before the L3 coil. So just wondering if it makes a difference which side of the coil the 2.2 cap goes on.
Thanks, Barry

[DavidF]

Hi,
Just finished the Nelson Pass L300 crossover for my latest speaker project. I assembled the crossover exactly as i see it on the schematic, with R3,R4,C4,L2,L3 soldered to a common point. On the original L300 schematic it shows a 1.5uf cap after the 0.3mh coil. On NP xo he shows a 2.2 cap before the L3 coil. So just wondering if it makes a difference which side of the coil the 2.2 cap goes on.
Thanks, Barry

Shouldn't make any difference unless there is something going on with impedance. I wouldn't be concerned.