line level input?

[pyonc]

Hi

Attached is a pic of the inputs on the back of JBL SG520 preamp.
As I have a new phono preamp, I am looking for line level inputs here.
Clearly I see AUX is line level input,
but what about other inputs such as MIC, TAPE, TUN? Are they too?
Can I I hook the output RCAs from phono preamp into one of them, in addition to AUX?
Just fuzzy and curious.

Currently I use AUX rear to play CDs, and I can use another AUX on front to play records.
But if I can use MIC, TAPE or TUN as the line level input, that would be nice cosmetically.

Thanks for your help in advance.

[BMWCCA]

Either "tuner" or "tape" should work fine. "Microphone" looks like it's set aside with the low-level phono inputs, which is to be expected.

[grumpy]

Without looking at the manual, I'd leave the MIC input alone.
TAPE PLAY, AUX REAR, TUN 1, TUN 2 should all be equivalent once
selected (which may be by different means).

[Ruediger]

Line level is -10 dBV, that is 316 mV.

Ruediger

[pyonc]

Either "tuner" or "tape" should work fine. "Microphone" looks like it's set aside with the low-level phono inputs, which is to be expected.

Tested TUN and TAPE. They all work fine! Thanks for your feedback.

[pyonc]

Without looking at the manual, I'd leave the MIC input alone.
TAPE PLAY, AUX REAR, TUN 1, TUN 2 should all be equivalent once
selected (which may be by different means).

Yes, grumpy! Tested TAPE, TUN 1 &2, and all work as fine as AUX. Thanks much!