PDA

View Full Version : Best value capacitor with 2405H



David Ketley
04-24-2014, 10:17 AM
What value capacitor in series do you recommend for the 2405H Im using a JBL 2446 crossed over at 1600 Hz?

Dave

Robh3606
04-24-2014, 12:44 PM
Not enough info WAG 1-1.5uf Rob:)

Ian Mackenzie
04-25-2014, 02:28 AM
Check this post for overall advice on how to proceed.

I single pole filter on the 2405 is not typical for a high pass filter.

The filter in the link below will provide some detail on the filter function with using a large format driver. Your particular setup, driver locations may vary the parameters and you will need to make measurements to ensure correct operation.

Good luck

http://www.audioheritage.org/vbulletin/showthread.php?32358-4345-4355-networks&p=327404&viewfull=1#post327404

audiomagnate
04-25-2014, 02:29 PM
Nelson Pass uses a 1.5 (or is it a 1.0?) in single pole FWIW.