PDA

View Full Version : Removing x-over on L100



Donald
10-15-2004, 06:57 AM
How does one remove the x-over in the L100? The 4th screw is covered by the foil. My foils are in good condition.

4313B
10-15-2004, 07:03 AM
Heat up the foilcals and carefully remove them. Use a heat gun or hair dryer.

boputnam
10-15-2004, 09:11 AM
Be VERY patient. Do not think you can re-flatten a foilcal that get's inadvertently bent. :no: Almost impossible, and even if you get close, you'll forever know it's not. Even on an L100... ;)

4313B
10-15-2004, 09:18 AM
All I can think of is that, at the time, it must have seemed like shear brilliance to cover mounting screws with foilcals...

:bash:

boputnam
10-15-2004, 09:29 AM
And more-so, to have the mounting screws come in from the front of the baffle. Stroke of genius. Then, let's hide the L-pad way up in the corner, furthest from the woofer hole, and behind the duct so that is impossible to do anything without removing it. Doh!

4313B
10-15-2004, 09:46 AM
"Number One, I order you to take a number two."