L250 Xover

[Dano]

Hi, I purchased a pair of L250s (not ti) the other day and would like to recap the crossovers. I have searched the forum and the web and have found schematics but I cannot read the values of most of the capacitors. Does anyone have a clear copy of the schematic? Suggestions are welcome.

[Robh3606]

Here is the cleanest copy I have it should work OK

Rob:)

[Dano]

First, I would like to say a belated thank you to Rob for the clearest of several schematics I have looked at so far. I am just now getting back to this thread. After giving the schematic a good close look I am still having issues making out a capacitor or three. Take a look at C3. Is that a 4.0 or 40? Also, they seem to use 0.01 and .01 and 0.005 and .005 check out C7,9,12,14,17,19,21 and C2,8,13,18. All 0.01 and 0.005? Anybody's opinion would be appreciated. One last thing. Is there anything else on the crossover that should be replaced to potentially improve performance?

[Robh3606]

Looking at an L250 crossover C3 is a 40uf electrolytic. The smaller values look like mylar bypass capacitors.


Rob:)