KTG

[KTG]

Hello, i have a pair 4315's with 3114a crossover. 1 am looking for a replacement resistor because one has a broken wire. The markings have R.C.D. 2.5 ohms, 10% , 10 watt. Tan in color. 1.75 inches long, about 1/4 x 1/4 inch sq. It appears to be ceramic or sand stone. This resistor controls the 2105 5". Any source for this would be helpful, thanks, ktg.

[fpitas]

Mouser or Digi-Key are where I'd look first.

Here's one at Mouser:

http://www.mouser.com/ProductDetail/Vishay-Dale/CW0102R500JE12/?qs=sGAEpiMZZMtbXrIkmrvidDdY%2fwKIbxTCgGHDHUFUYtg% 3d

[just4kinks]

http://www.mouser.com/ProductDetail/Vishay-Dale/CW0102R500JE12/?qs=sGAEpiMZZMtbXrIkmrvidDdY%2fwKIbxTCgGHDHUFUYtg% 3d

He would probably be better off with a non-inductive resistor. I would suggest this one:

http://www.parts-express.com/pe/showdetl.cfm?partnumber=005-2.5

[fpitas]

He would probably be better off with a non-inductive resistor. I would suggest this one:

http://www.parts-express.com/pe/showdetl.cfm?partnumber=005-2.5

Couldn't hurt, although the old one sounds like a common wire-wound.

[KTG]

Thanks for your assistance, this helps a lot. KTG