View Full Version : Jbl 2450j vs 2450j-1 (meyer sound ms-2001 a)
stephane RAME
01-20-2013, 02:51 AM
The same base but different diaphragm.
57984
57986
57985
Stéphane
ivica
01-20-2013, 07:13 AM
The same base but different diaphragm.
57984
57986
57985
Stéphane
Any experience with?
Regards
Ivica
Mr. Widget
01-20-2013, 10:49 AM
Before Meyer started building their own drivers and diaphragms, they used JBL 2441s for their large format drivers. They continued using 2441 diaphragms in other JBL drivers after JBL stopped producing the alnico classic.
Do not pull the diaphragm from the Meyer... they are individually installed and and shimmed as needed in an anechoic chamber.
Widget
stephane RAME
01-20-2013, 11:24 AM
Yes, it's the compression drivers pulled from Meyer MSL-3A boxes.
Stéphane
Lee in Montreal
01-20-2013, 02:58 PM
Diaphragms look like the usual JBL aluminum and titanium units, as found in 2441 and 2445 drivers.
Mr. Widget
01-20-2013, 03:43 PM
Diaphragms look like the usual JBL aluminum and titanium units, as found in 2441 and 2445 drivers.That was my point... Meyer continued to buy JBL 2441 diaphragms that they hand installed and calibrated in other JBL drivers after the 2441 driver was discontinued. Even though titanium diaphragms are more durable, Meyer never used them in their compression drivers due their sound quality.
Quite a few years ago Meyer started building their own drivers in house. In their own drivers they use aluminum domes, but they bond them to mylar surrounds instead of the JBL diamond surrounds.
Widget
JeffW
01-20-2013, 03:51 PM
Google JBL 2450 Meyer, it tells the story. Eh, here ya go
http://www.meyersound.com/support/forums/talkshop/drivers.htm
Lee in Montreal
01-20-2013, 05:15 PM
Quite a few years ago Meyer started building their own drivers in house. In their own drivers they use aluminum domes, but they bond them to mylar surrounds instead of the JBL diamond surrounds. Looks like they are doing like Radian with their mylar "suspension"...
Mr. Widget
01-20-2013, 07:00 PM
Looks like they are doing like Radian with their mylar "suspension"...Kind of...
I'd say it is like Chevy and Ferrari both using V8s.;)
Widget
subwoof
01-21-2013, 09:15 PM
if you look close you will find a thin bead of clear silicone near/on the diamond suspension. it's the very flexible mil-spec stuff. every meyer I saw had it - both alnico and Nd mags with the 2441 dia.
more10
01-22-2013, 03:41 PM
My Meyer 2441 got the silicone stuff on the surround. They also use ferrofluid in the gap.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.