PDA

View Full Version : Re applying Folical Badges



Audiobeer
03-11-2012, 06:43 PM
I've removed the folical badges off of my studio monitors and was wondering if someone here had a good method for reapplying them. I cleaned the excess adhesive the best I could off the back.

subwoof
03-11-2012, 07:09 PM
contact cement works well - let it dry a full 10 min before sticking it on. a little goes a LONG way.

*wait*

where are these located and what model???

Audiobeer
03-11-2012, 07:49 PM
They are 4313B's and they are right on the face in the front. Any specific brand of contact cement? Thanks Sub! :)

subwoof
03-11-2012, 08:14 PM
if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.

Audiobeer
04-28-2012, 05:47 PM
if on the baffle proper, weldwood from home depot works fine. use just a LITTLE.

I found some Weldwood contact cement. Thanks Sub. Will give this a shot!

subwoof
04-28-2012, 06:01 PM
use CONTACT CEMENT....

The manufacturer I see the most often is DAP / weldwood.

Audiobeer
04-28-2012, 08:01 PM
Thanks Sub. Just got back and put a coat on.

SteveJewels
02-15-2017, 06:26 PM
Thanks Sub. Just got back and put a coat on.

Wow! Beautiful speaker!