PDA

View Full Version : Accessing L-pads on 4425/30/35



Mike F
02-07-2012, 06:21 PM
Must one remove the Foilcals to gain access to these parts? I`d like to give mine a good cleaning but the thought of messing with those plates is intimidating.
TIA

stephane RAME
02-07-2012, 10:14 PM
Must one remove the Foilcals to gain access to these parts?

Yes, it takes off the foilcals, to access the screws.

Stéphane

Mike F
02-08-2012, 09:29 AM
Yes, it takes off the foilcals, to access the screws.

Stéphane

Merci pour la reponse.
Would heating the plate with a hair dryer help in removing it? I would hate to bend or crease it in the process.

hjames
02-08-2012, 09:36 AM
Merci pour la reponse.
Would heating the plate with a hair dryer help in removing it? I would hate to bend or crease it in the process.
An industrial heat gun is supposed to be the way to do it,
but a higher temperature hair dryer may prove helpful

SteveW
02-08-2012, 11:54 AM
Removed mine with no problems using a hair dryer and a thin guitar string. A buddy held the gun and with the string wrapped around my knuckles I just pulled it under the plate and all was good.

Mike F
02-08-2012, 12:11 PM
Removed mine with no problems using a hair dryer and a thin guitar string. A buddy held the gun and with the string wrapped around my knuckles I just pulled it under the plate and all was good.
Good tip. Not having access to a guitar string, I suppose some fishing line would work just as well.

stephane RAME
02-09-2012, 03:51 AM
http://www.jblproservice.com/pdf/Studio%20Monitor%20Series/4425LR.pdf
http://www.jblproservice.com/pdf/Studio%20Monitor%20Series/4430LR.pdf
http://www.jblproservice.com/pdf/Studio%20Monitor%20Series/4435LR.pdf

4 screw

Stéphane