View Full Version : 226J or 228H- has anyone used them?

12-16-2011, 11:21 AM
Zilch (RIP) had mini-Econowaves with these drivers, but I can't find much about them other than in the Econowave threads. Was looking for something like a 2118 in the midrange, has the snap of the 2118, but could go a little deeper.

12-16-2011, 12:16 PM
Based on the AC28/95 box, a pair should be good to 60Hz (-3dB).
I have a pair of the J-version and was conversing with Zilch about
center channel use (sideways MTM) but when he passed, so did my
zest for working on it. If I build it up, I'll post here. Seems like a
good driver hiding in a stamped frame shell.

12-16-2011, 03:46 PM
Yeah the motor is as state of the art as they come...lots of motor and lil lower Fs. Looks great on paper.

12-16-2011, 06:47 PM
Grumpy, you wouldn't have any physical measurements of the drivers would you? Something like depth and diameter of the motor would be VERY helpful.

12-16-2011, 07:42 PM
4.25" deep overall, just over 4" from back of front flange to back of magnet.
Largest part of magnet diameter is 6.25"