Bypassing Mylar Caps that are in parallel

[jfine]

I want to try and use a .01 uf bypass cap on the midrange section of a L150 crossover:

53693
53694

These appear to be 2) 6uf mylar caps wired in parallel?

If so, if I were to bypass using a .01 cap, would I need to use 2 bypass caps, 1 for each 6uf, or can I just use 1 bypass cap, since they are wired in parallel?

:confused:

[4313B]

can I just use 1 bypass cap, since they are wired in parallel?yes

[jfine]

Thank You! :)