PDA

View Full Version : 035tiA help needed



bigstereo
10-26-2011, 10:38 AM
Does anyone know the inner diameter and width/thickness of the 62664 rubber "o-ring" retainers that are used on the 035Tia tweeters?

Or does anyone know where this part or material can be had. The rubber piece that holds the screen in place.

rdgrimes
10-26-2011, 01:00 PM
Does anyone know the inner diameter and width/thickness of the 62664 rubber "o-ring" retainers that are used on the 035Tia tweeters?

Or does anyone know where this part or material can be had. The rubber piece that holds the screen in place.
Call Harman parts and ask, they may have some. Any black neoprene o-ring of correct diameter can work, you just cut it to the right length. If you have a piece of it, take it to Lowe's or any plumbing house and find some of the right diameter. You can even piece together a couple smaller ones if need be, it doesn't have to be one piece.

What's really tough to find is the grey ones for 044 tweets.

bigstereo
10-28-2011, 02:01 AM
Thank you.
I asked this question on someone else's behalf. A call was made to JBL and it appears that they were very helpful.