View Full Version : Fake 2452 drivers?
lbstyling
09-03-2011, 04:37 AM
This chap seams to have had a lot of them, all 'slightly used'-
What you think? Probably fake, but do they measure well?
http://www.ebay.co.uk/itm/JBL-2452H-1-5-EXIT-LARGE-FORMAT-COMPRESSION-DRIVER-/220840426305?pt=LH_DefaultDomain_0&hash=item336b1d7b41#ht_720wt_1139
Robh3606
09-03-2011, 06:14 AM
There not fakes. They are the real deal, used but real. We have been trying to figure out where it gets it all from for a couple of years now.
Rob:)
cooky1257
09-03-2011, 11:35 AM
They are genuine and he is a decent guy to deal with too.
Cooky
speakerdave
09-03-2011, 02:37 PM
Question is, Why is he on the UK ebay site? Didn't he used to sell out of SoCal.
hjames
09-03-2011, 02:41 PM
Question is, Why is he on the UK ebay site? Didn't he used to sell out of SoCal.
He's not on eBay UK - the other poster (lbstyling) came into ebay from the UK side - he showed it as an ebay.uk address ...
but we just see regular ebay address.
Thus:
http://www.ebay.com/itm/JBL-2452H-1-5-EXIT-LARGE-FORMAT-COMPRESSION-DRIVER-/220840426305
Or if you are french:
http://www.ebay.fr/itm/JBL-2452H-1-5-EXIT-LARGE-FORMAT-COMPRESSION-DRIVER-/220840426305
cooky1257
09-04-2011, 01:47 AM
He's not on eBay UK - the other poster (lbstyling) came into ebay from the UK side - he showed it as an ebay.uk address ...
but we just see regular ebay address.
Thus:
http://www.ebay.com/itm/JBL-2452H-1-5-EXIT-LARGE-FORMAT-COMPRESSION-DRIVER-/220840426305
Or if you are french:
http://www.ebay.fr/itm/JBL-2452H-1-5-EXIT-LARGE-FORMAT-COMPRESSION-DRIVER-/220840426305
Yep he is SoCal based.
I'm still baffled by the non sequitur.
He even had 476Be for sale at one point!
lbstyling
09-04-2011, 02:21 AM
Well that works out as Ive decided to go for a 4 inch 2447- 2452 generation driver to cover the mid range.
Not worked out what horn to put it on, but It needs to be conical- a la JMLC etc.
http://www.diysoundgroup.com/WaveGuides.htm
Does anyone have any data on the FR of somthing like that?
I have a pair of 2452H for sale if you want (same source)
lbstyling
09-04-2011, 02:33 AM
Well that works out as Ive decided to go for a 4 inch 2447- 2452 generation driver to cover the mid range.
Not worked out what horn to put it on, but It needs to be conical- a la JMLC etc.
http://www.diysoundgroup.com/WaveGuides.htm
Does anyone have any data on the FR of somthing like that?
lbstyling
09-04-2011, 08:29 AM
bagged em!:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.