PDA

View Full Version : Spring loaded connector cap for LE14H-1



kmanusa
06-20-2011, 03:34 PM
Does anybody know where I can get the push-on cap of the spring loaded connector that is used to connect the LE14H-1 woofer to the crossover wire? I opened my 250ti with the loose binding post today and found that someone had broken off the small metal cross piece on the cap, causing the connector to not hold the crossover wire securely in-place. I rigged up something temporarily so that the wire holds but in tinkering with the connector I noticed the top part is just a push-on cap with a small spring inside. There are 2 of these of course, color coded red and black. I could use a cap of either color but black is preferred.

I am attaching an LE14H photo that shows the type of connectors I am talking about. Note this is not a photo of my woofer, I found this photo on the Web. I apologize if using this kind of photo is verboten but I have not found an indication on the forum that this is prohibited.

kmanusa
07-16-2011, 04:38 AM
Problem solved, thanks John W!