View Full Version : Loking for a physically small 1" compression driver
mikey7182
04-20-2011, 06:32 PM
I own a pair of 2426J but they are too large physically for my application. What is the smallest 1" exit compression driver JBL makes? I need usable range from about 1.25-20khz. Anything out there significantly smaller than the 2426? Maybe a neo driver?
edgewound
04-20-2011, 06:41 PM
2408H/J is a screw-on 1" exit, 1.5" voice coil neo driver with mylar ring radiator diaphragm.
It's pretty small.
mikey7182
04-20-2011, 07:13 PM
Everything that comes up in a Google search lists the 2408h as a 1.5" driver. Does the screw type make the exit smaller? I need to mate these with 1" bolt on lenses and I have male and female screw on adapters, but I think everything has to be 1".
edgewound
04-20-2011, 07:17 PM
Take my word for it.
It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.
The voice coil is 1.5".
mikey7182
04-20-2011, 07:21 PM
Take my word for it.
It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.
The voice coil is 1.5".
Perfect, I just wanted to make sure I wasn't missing something. I'll look into them, thanks!
Eaulive
04-20-2011, 08:12 PM
Take my word for it.
It's a standard screw-on, 18 threads per inch, 1" exit driver. I promise.
The voice coil is 1.5".
I confirm :yes:
mikey7182
04-20-2011, 10:18 PM
I confirm :yes:
Woo hoo! :D They don't appear to have been sold outside a cab, so I'm not finding much info on them. Any t/s parameters?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.