PDA

View Full Version : JBL 2215A/ E-145 and 2235 recone kit



hlaari
01-26-2011, 12:29 PM
Can I put 2235 recone kit in 2215A or E-145 frame:dont-know:

can someone tell me how this will work





Thanks
Ari

ratitifb
01-26-2011, 12:56 PM
Can I put 2235 recone kit in 2215A or E-145 frame:dont-know:

can someone tell me how this will work





Thanks
Arihttp://www.audioheritage.org/vbulletin/showthread.php?7850-E140-2225&highlight=2235H

Robh3606
01-26-2011, 03:25 PM
No.

Rob:)

Rolf
01-27-2011, 06:56 AM
No, because the depth of the voice coil are different. Right Rob?

Eaulive
01-27-2011, 04:26 PM
No, because the depth of the voice coil are different. Right Rob?

2235 = overhang + shallow cone
E-145 = underhang + deep cone

Like trying to fit a GM engine to a Honda transmission :blink:

Robh3606
01-28-2011, 06:07 AM
It's several things. Overhung vs underhung on the coil so different coil depths and widths, the basket depth because of the extension ring added to accomadate the deeper cone and the top plate thickness all make an E-145 frame unique.

Rob:)

Rolf
01-28-2011, 11:33 AM
Exactly what I meant. In Paragon, with the LE15A (2215), I remember being told that it was impossible to make the voice coil to "jump out" of the gap. In my 2235's it is possible, but I don't want to be in the room at that point.:D


2235 = overhang + shallow cone
E-145 = underhang + deep cone

Like trying to fit a GM engine to a Honda transmission :blink: