Pictures of your JBL -system

[Niklas Nord]

It would be great to se some pictures of your JBL -loudspekaers...

[Dave G]

Checking Attachments method.

[Dave G]

With 2226J to fill the hole for photo's!!

[Dave G]

Can't get that dust off the slant plate horn. Shows up in photo's!

[neriks]

Niklas Nord,

Here are a few pictures that I know you'll recognize ;)


http://www.neriks.com/Images/HifiForum/Current/FrontSpeakers1.JPG

http://www.neriks.com/Images/HifiForum/Current/FrontSpeakers3.JPG

http://www.neriks.com/Images/HifiForum/Current/MidbassAndHorn1.JPG

[Mr. Widget]

Beautiful!

Please list your components and crossover type/frequencies.

Which mid horns are you using?

Thanks for the post.

BTW: I thought with this new forum we could only post one photo per post.

[Don McRitchie]

Originally posted by Mr. Widget
BTW: I thought with this new forum we could only post one photo per post.

The limit applies to attachments. If you are linking to photos on the Web like Neriks, there are no restrictions.

[Mr. Widget]

Learning how to do all this computer stuff is taking away from my speaker building time!

[4313B]

Outstanding!

How is the mutual coupling with those 2242H's? I can't remember what you have them tuned to, what was it? What is the low pass set at? Did you ever sell your 2245H's?

[neriks]

Originally posted by Mr. Widget
Beautiful!

Please list your components and crossover type/frequencies.

Which mid horns are you using?

Thanks for the post.


Mr. Widget,

Tanks! :)

Each subwoofer enclosure hosts two 2242H and is tuned to 27Hz. The internal volume is approximately 700 liters.

Each midbass enclosure hosts a 2226H. The internal volume of each enclosure is approximately 140 liters.

The wooden horn uses a 2446H each. The horns are built by-hand and are made out of American white-oak.

The system is actively driven with separate amplifiers for each register. The amplifiers and crossover frequencies are listed below:


The Subwoofers is driven by a Mark Levinson No.336, crossed at 60Hz
The midbass enclosures are driven by a Rotel RB-991, crossed between 60Hz and 500Hz
The wooden horns are driven by a Mark Levinson No.331, crossed at 500Hz

[neriks]

Originally posted by Giskard
Outstanding!

How is the mutual coupling with those 2242H's? I can't remember what you have them tuned to, what was it? What is the low pass set at? Did you ever sell your 2245H's?

Giskard,

Tanks! ;)

I think that the mutual coupling phenomenon is contributing to the enormous sound pressures that can be produced in my listening room ;) ... However I haven't conducted any measurements that can verify this.

I still have those 2245H's. Unfortunately they need to be reconed before I can use them.

[Niklas Nord]

the fame is getting out in the world.
neriks system IS outstanding, it sounds - GREAT!

..and the looks..!!