PDA

View Full Version : L96 - LE10H Frequency Question for JBL Experts



Zekeman
11-27-2010, 04:41 PM
Question for you JBL experts; What is the frequency handled by the LE10 in the L96? Where does it roll off?

Thanks.

BMWCCA
11-27-2010, 05:09 PM
Question for you JBL experts; What is the frequency handled by the LE10 in the L96? Where does it roll off?Does this help at all?

http://manuals.harman.com/JBL/HOM/Technical%20Sheet/L96%20Delta%20ts.pdf

Zekeman
11-27-2010, 05:19 PM
Aaah yes it does!! 1100 Hz...

Thank You!!

Zekeman
11-27-2010, 05:27 PM
Does anyone know of any people matching up the LE10H's with horns, and if so, what was the result?

Thanks.

BMWCCA
11-27-2010, 07:58 PM
Try this, too: http://audioheritage.org/vbulletin/showthread.php?10663-LE10H-LE10H-1-LE111H

There are bound to be some Econowave references.

4343
11-27-2010, 10:25 PM
Try this, too: http://audioheritage.org/vbulletin/showthread.php?10663-LE10H-LE10H-1-LE111H

There are bound to be some Econowave references.

Surprisingly few measurements though. I have LE10A that are in the process of becoming a system with PT-95HF, still a work in progress. (Too cold to paint the baffles right now...)

I did have some plots saved in my RTA, but when I plugged it in just now it requested a software and firmware update, which wiped them out. :crying:

From memory, it makes it past 1KHz easily, perhaps 1.2K:dont-know: before rolling off.

Robh3606
11-28-2010, 08:31 AM
Does anyone know of any people matching up the LE10H's with horns, and if so, what was the result?



If I remember right there was at least one long time member that used LE-10 with 2307/lense. No reason it won't work but you take a big efficiency hit on the horns. He seemed to like them just fine. I think he used a pair possible in an MTM config.

Rob:)