PDA

View Full Version : Need Help with ID, I have an NOS "G25" JBL Grill & an NOS JBL A22 adapter Kit



Choatpadda
11-22-2010, 06:21 PM
I am trying to find the JBL model the G25 Grill fits, and what the A22 Adapter kit went to. I will attach a couple Pics of the Boxes and the A22 adapter kit out of the Box.

BMWCCA
11-22-2010, 07:20 PM
The A22 adapter kit was used in the C36 and C38 enclosures. Looks like your pieces include block-off plates for the holes used for mounting 075 and LE175DLH depending on load and adapters for blocking off the 15-inch mounting hole when using smaller (12", 8") woofers than a 15" D130 or 130A, as well as block-off plate and wiring adapter for use with a full-range driver and no crossover. Seems the kit was used with many configurations and had enough parts to accommodate any of many different loads. Perhaps the grille is from a similar cabinet. Why don't you open it up and let us see the grille?

http://www.lansingheritage.org/images/jbl/catalogs/1962/page20-21.jpg

Choatpadda
11-22-2010, 07:49 PM
The A22 adapter kit was used in the C36 and C38 enclosures. Looks like your pieces include block-off plates for the holes used for mounting 075 and LE175DLH depending on load and adapters for blocking off the 15-inch mounting hole when using smaller (12", 8") woofers than a 15" D130 or 130A, as well as block-off plate and wiring adapter for use with a full-range driver and no crossover. Seems the kit was used with many configurations and had enough parts to accommodate any of many different loads. Perhaps the grille is from a similar cabinet. Why don't you open it up and let us see the grille?

http://www.lansingheritage.org/images/jbl/catalogs/1962/page20-21.jpg


Thanks!! You are an Wealth of Info! I called the JBL CS dept which was an exercise in futility...You Could Run the Place Now...lol
I will open up the Box with the Grill and Post an Photo. It has the "G25" on the Box and I assume that would go with an "C25" cabinet but IDKFS

Choatpadda
11-23-2010, 11:14 AM
Added Photos of Grill Front & Back

BMWCCA
11-23-2010, 06:47 PM
What are the dimensions?

My guess is it's for the Athena SC99:

48690

Choatpadda
11-24-2010, 05:36 AM
What are the dimensions?

My guess is it's for the Athena SC99:

48690

They are about 23" Wide and that has to be it! I looked up an photo and found they have just the Two mounting Posts Middle top & Bottom matching the holes on the grill. Nice photo, I actually have an Pair of the Lancer 99's with the Fretwork type grill like the one in the photo.
Thanks Again! You really do Know Vintage JBL.