ugmold
10-03-2010, 01:08 PM
Hi Folks,
Pardon me if I am posting in the wrong place. Today at a Flea Market I picked up a JBL Caberet 4612B Speaker cab, the speakers were not mounted (no screws) but all looked ok, figured something must be up with it.
Got it home, tested all speakers/horn, seem to work. tried making a connection thru the rear panel, found a schematic on as to where the speaker wires go. But no sound thru the crossover.
http://www.jblproservice.com/pdf/Cabaret%20Series/4612B.pdf
I took a closer look with the flashlight and it seems the positive terminal has a wire from the input to the extension speaker out but connects to nothing else? The negative goes to a terminal with all the speaker connections. Any ideas?
Thanks so much,
-ugmold
Pardon me if I am posting in the wrong place. Today at a Flea Market I picked up a JBL Caberet 4612B Speaker cab, the speakers were not mounted (no screws) but all looked ok, figured something must be up with it.
Got it home, tested all speakers/horn, seem to work. tried making a connection thru the rear panel, found a schematic on as to where the speaker wires go. But no sound thru the crossover.
http://www.jblproservice.com/pdf/Cabaret%20Series/4612B.pdf
I took a closer look with the flashlight and it seems the positive terminal has a wire from the input to the extension speaker out but connects to nothing else? The negative goes to a terminal with all the speaker connections. Any ideas?
Thanks so much,
-ugmold