PDA

View Full Version : Newbie With Century 100 Question



parisphoto
04-29-2010, 06:17 AM
Hi,
Just picked up my first pair, and I must say that all the good things that I have heard are true.

The foam (?) rings around the tweeters are sort of rust colored, and are dried to the point of flaking. I gently pushed in on the rings, and they seem hard, just the opposite that I expected.

Here are my questions.

Can I replace the rings? If so, is there a "How To Guide" available online?
Are rings available?

There seems to be a lot of different part / model numbers for the components.
How can I identify exactly what I've got.

Thanks to all.

clmrt
04-29-2010, 07:19 AM
Can you pull the drivers and supply model numbers with photos?

The rings are available from JBL Service. Be careful when you remove the old ring - the tweeter lead wires are just below the adhesive.

parisphoto
04-29-2010, 09:04 AM
Thanks.
I went to JBL Service, but could not find my speakers.
Under which category are they listed?

Sorry about the very basic questions, but I was an AR 2ax guy before these.

clmrt
04-29-2010, 02:58 PM
Page 32, 9th 0r 10th up from the bottom

http://www.jblproservice.com/pdf/Misc.%20Parts%20List/Misc%20Parts%20List%20(by%20desc.).pdf