PDA

View Full Version : C34



cruz
03-20-2010, 10:15 AM
just picked up a pair of c34 w/030 but one of the 130's is dead....
everything else works..cabs are rough cosmetically but they were $50pair
will a D140(8 ohm) damage the crossover?...I can't image these in a living
room....thanks

jcrobso
03-22-2010, 07:54 AM
just picked up a pair of c34 w/030 but one of the 130's is dead....
everything else works..cabs are rough cosmetically but they were $50pair
will a D140(8 ohm) damage the crossover?...I can't image these in a living
room....thanks

If it is a 16 ohms crossover the D140F 8 ohm will not damage the crossover, but the lower impedance will affect the crossover frequency sightly, but no permanent damage will occur. You can use the D140F while you are getting the D130 reconed.

cruz
03-22-2010, 03:20 PM
Thanks a bunch....just didn't want to destroy anything...
now to decide on recone one or both...thanks again
yes the crossovers are switchable..16/32