PDA

View Full Version : X-Raof a 2405



1audiohack
02-22-2010, 08:04 PM
I always wanted to have a clear idea of the flair to plug relationship in a 2405, without cutting one up so I had one X-Rayed.

Looking closely you can see the magnet through the iron pot also.

mech986
02-23-2010, 03:08 AM
Neat X-Ray! Nicely done!

ratitifb
02-23-2010, 04:29 AM
Thanks for sharing ;)

But one question is now going through my mind :screwy:

How sensitive is alnico V against degaussing X-ray field :blink:

scott fitlin
02-23-2010, 06:08 AM
Thanks for sharing ;)

But one question is now going through my mind :screwy:

How sensitive is alnico V against degaussing X-ray field :blink:That's a good question.

Beowulf57
02-23-2010, 07:38 AM
Short answer: insignificant. Long answer (alnico not tested, but I would doubt much difference):

1audiohack
02-23-2010, 08:49 AM
Thanks Beowulf57 for the link.

I wasn't too worried about it getting demagged. I have hi resolution impeadance, frequency and magnatude plots from four of these taken after I replaced the diaphragms in them. I plan on remeasuring this one again just to check. If its mad I will just re-charge it.

I wish I could see though everything!

JeffW
02-23-2010, 09:34 AM
Just don't schedule it for an MRI :D

mech986
02-23-2010, 03:44 PM
Just don't schedule it for an MRI :D


:rotfl::rotfl::rotfl::rotfl:

Good One!

Yes, no danger of X-ray causing demagnetization.