2214H 4" dust caps

[Regis]

If any of you kind gentlemen can provide some insight into this, I'd appreciate it. One of the 2214H's (Pro) I purchased has a badly dented dustcap, but is in otherwise excellent condition.

I called JBL Pro Parts and they only have one part number for their version of the 2214H, which I'm sure is the 3" dustcap as that's what they came with. He told me I'd have to call the NY office or go the website. The website for parts only has the complete woofer.

Anybody have a P/N for the 4" dustcap and a phone number for this? Man, I flogged the Pro site and found the 4425 data and the home site for the tech data on the L-100T, but no dustcap number!

[speakerdave]

21060-MS Dust dome spares $2.25

Is this the number you have? Doesn't say the size.

[Regis]

...because that wasn't the PN the Pro guy gave me. It was a 33535 or something like that. Not like that one at all, so that must be the home version (4" I hope). I'll call JBL NY tommorow. Thanks for the help!

[4313B]

The 2214H is a Pro driver that was also used in several Home systems.
It has a 3-inch dust cap, P/N 31385. This dust cap is also used on:
LE10H
LE10H-1
MI-15
LE111A
LE111H
112A
112H
122A
122A-1
123A
123A-1
123A-3
126A
128H
128H-1
129H
PR300
2108
2108H
2122H
2212
2213
2213H

4-inch dust cap P/N 21514 is used on:
LE14A
LE14H
LE15A
LE15B
LE15H
PR15
PR15F
PR15R
123A-2 (inverted)
150-H
2121 (inverted)
2121H (inverted)
2215
2215A
2215B
2215H
2216
2290

4-inch dust cap P/N 50201 is used on:
LE14H-1
PR15C
PR15D
M45
M45-4
M45-8
M45-16
M46-8
M46-16
M51-4
116A (inverted)
116H (inverted)
121A
121H
124A
124H
125A (inverted)
127A (inverted)
127H (inverted)
135A
136A
136B
136H
E145-8
E145-16
K145
K145-4
K145-16
K151-8
K151
K151-4
K151-16
2203A
2203H
2204H
2205A
2205B
2205C
2205H
2205J
2225H
2225J
2230A
2231A
2231H
2234H
2235H
2240G
2240H
2245H

Hope this helps...

[4313B]

Originally posted by speakerdave
21060-MS Dust dome spares $2.25

Is this the number you have? Doesn't say the size. Used on:
D15S
M20
M21
M21-4
M21-16
M22-8
M22-16
M30
M31
M31-4
M31-16
M32-4
M32-8
M32-16
M35-4
M40
M41
M41-4
M41-16
M42-8
M42-16
M55-8
D120
D120F
D120F-2
D120F-6
E120-8
E120-16
K120
K120-4
K120-16
D130
D130F
D130F-2
D130F-6
D130H
E130-4
E130-8
E130-16
K130
K130-4
K130-16
D131
D131F
D140F
D140F-2
D140F-6
E140-8
E140-16
K140
K140-4
K140-16
E155-4
E155-8
2130
2135

[4313B]

Originally posted by Robh3606
Smart Ass :rotfl:

Rob:) It's for the cause man.

[Robh3606]

Smart Ass :rotfl:

Anything for the cause!

Rob:)

[4313B]

Speaking of smart asses - JBL just sent me some replacement 2121 dust caps in a padded envelope. Three guesses as to their condition upon arrival. :rolleyes:

[Zilch]

BWAAAAHAHAAAAAA!!!!

:rockon1:

[Oldmics]

Guess #1-Perfect Condition

Guess #2- Compleatly Destroyed

Guess #3-Inverted ???,Courtesy of the shipper so that you will not have to invert them yourself upon installation ?

[andresohc]

Regis, I just refoamed a pair of 2214H and put new dustcaps on them. I took the speaker to OCS and they couldnt come up with the same size cap and suggested I use the one a size up. After preparing the speaker I think I found out why. When I removed the other caps, the cone continues down to about a one inch vent at the center, most of the speakers I reconed the cap goes to the width of the voice coil and the pole piece is uncovered. On this speaker I couldnt clean off the old part of the cap on the cone without damaging the cone so I went a size up and covered the other cone remnants(about 1/4inch over). Also if you havent removed the cap yet, because the cone extends below the cap glue, you have to be careful to cut shallow or parallel to the cone surface or the best of both not to cut the cone underneath. I didnt know that but got lucky on the first one I opened.

[boputnam]

Done.

[Regis]

... Giskard for the P/N's. I'll go with the 4"rs and the safe route as Andre has. The woofers are on their way and since it was an Ebay purchase, what I've started doing is not only checking the feedback, but looking at what exactly the seller has shipped. So far, so good as this guy has shipped 32" TV's, big Guitar Amps and other heavy but delicate items. Then I go a step further and ask them to pack it very carefully.

[Bin]

Hello.

At me such problem., a code back I have bought where that in Germany JBL l 220. As they are heavy enough, I have asked снить from them all speakers of a bass and to pack separately. And one year at me stand JBL L220, without speakers. The box with speakers was lost it is not known where. Who can prompt my where I can buy 2х LE14-h and 2х PR15D. Thank if who that will help.

With best regards Podkin Sergei.

[edgewound]

127A (inverted)
127H (inverted)

Hope this helps...

Respectfully....I don't think these drivers had an inverted dustcap. Only when using the C8R127A to recone a 125A. Not trying to 'dis the master.

[4313B]

They didn't. I've posted numerous times the orientation of the 125 versus 127. What? Did I post it backwards one time?

***

Looking back through the thread I cut and pasted that list and didn't proofread it. Imagine that! :p

I'll send the link to a moderator to fix. Thanks for the heads up!

[Guido]

Speaking of smart asses - JBL just sent me some replacement 2121 dust caps in a padded envelope. Three guesses as to their condition upon arrival. :rolleyes:

:rotfl:
I still remember the 2121 story ;) You where close to a heartattack :D

[edgewound]

Speaking of smart asses - JBL just sent me some replacement 2121 dust caps in a padded envelope. Three guesses as to their condition upon arrival. :rolleyes:

Unfortunately...not too much surprises me anymore. In fact, it's surprising when things regularly go right:( .