PDA

View Full Version : jbl 2390 mounting



original jblguy
01-17-2010, 05:42 PM
Hopefully someone can help me???

how do i mount my 2390 to a baffle?

I'm not sure i have all the fasteners.

a picture would be great.

Thanks in advance:bouncy:

Flaesh
01-24-2010, 01:39 PM
http://homepage3.nifty.com/stonetechno/layout-3.html
2393 (on japan; found today occasionally). may be you find something useful..

original jblguy
01-24-2010, 08:28 PM
Thanks, but i need the 2390 horn lens assy. drawing (folded plate) Like the one in the hartsfield.:)

Flaesh
01-25-2010, 07:18 AM
:o: i confused 2390 with 2392.
however, 2392 large format 3" horn and 2392=2311+2308 :blink:

SMKSoundPro
01-25-2010, 04:30 PM
Is this what you are looking for?

http://www.audioheritage.org/vbulletin/showthread.php?t=19904&highlight=2309+2310+baffle

This is what i have in my workshop. Sounds great. The 2310 lense is tapped for 10/32 screws. Sandwich the baffle between the horn and lense.

Also, somewhere there is a whitepaper from JBL describing the right size off baffle board. I think 20" square???

Scotty.

original jblguy
01-26-2010, 06:59 AM
That's it. then (4) 10-32's is all that supports the horn, driver and lens?

subwoof
01-26-2010, 07:16 AM
Back when our company built custom cabs with this horn/lens we would remove the square metal blocks on the lens and retap the mounting holes to a larger size, 1/4-20. Pretty simple field mod.

This allowed a much wider choice of hardware, stronger mounting and the holes were already large enough on the horn so it made for a little better fit.

sub

SMKSoundPro
01-26-2010, 04:04 PM
retap the mounting holes to a larger size, 1/4-20.
sub

Great idea! Thanks Sub!

Scotty.

grumpy
01-26-2010, 04:08 PM
I'd still support the driver, regardless...

SMKSoundPro
01-27-2010, 09:41 PM
Yes, still support the driver somehow!