4343 cabinet stuffing?

[iain42]

My brother has almost finished with his 4343 cabinet build. The last step is to stuff the cabinet with foam. Does any have a pic of how much to use? This is the last step on this long project. Hopefully I'll get to hear them soon. Any advice much appreciated!

[BMWCCA]

My brother has almost finished with his 4343 cabinet build. The last step is to stuff the cabinet with foam. Does any have a pic of how much to use? Foam or fiberglass? Or some other poly-fill stuffing?

Here's what the inside of JBLCanuck's 4345s look like:

http://members.shaw.ca/missionkraft/IMG_0265.jpg

[iain42]

Thank you very much for the pic and info. It is appreciated.

[Robh3606]

Here's the inside of a 4343

Rob:)

[iain42]

Very nice thanks again :)

[Fangio]

The backside of the "doghouse" / 10" chamber should be covered also.

http://audioheritage.org/vbulletin/showpost.php?p=186033&postcount=112

[iain42]

Thank you Sirs :)

[Eaulive]

Here's the inside of a 4343

Rob:)

I don't get what's the board on the right. It's a crossover allright, a huge one, but it's not a part of this cabinet is it? :blink:

[hjames]

I don't get what's the board on the right. It's a crossover allright, a huge one, but it's not a part of this cabinet is it? :blink:
That previous drawing showed an external passive crossover one of the members blogged about a few years back ...
can't find the thread right off, but he built sand filled chambers and everything - it was pretty impressive.

http://audioheritage.org/vbulletin/attachment.php?attachmentid=43508&stc=1&d=1262492326

[Eaulive]

Ackk, sorry, that previous drawing showed an external passive crossover one of the members blogged about a few years back ...

Thanks for the sanity check :bouncy: