PDA

View Full Version : JBL SA-600 spareparts



jan_slagman
12-21-2009, 09:53 AM
Hello JBL SA-600 owners,

Since the restoration of my JBL SA-600 i get requests from all over the world for technical support.
I have discussed this matter with my fellow-technician Mr.Ruud Janssen and he decided to make a list of a of the parts he replaced to restore the JBL SA-600 amplifier.
The official JBL plan only mentions JBL factorynumbers.

Anyone who wants to receive this list list can drop me a line.

Kind regards,

Jan Slagman
Holland.

webean
07-03-2011, 06:25 PM
Thank you for offering to send your sa-600 parts list. I would like to receive one.

The resotration you did was phenomenal - it must have sounded terrific after all yur work.

Email to: [email protected]

Many thanks.

Cheers - Bill
Williamsburg, VA USA

hjames
07-03-2011, 08:12 PM
I just checked Jan's profile "Last Activity - 04-27-2011 11:16 AM"

That means his last visit to the site was a couple months back -
so he may not notice your direct post - if you want a quicker response,
its best for you to send him a PM directly to get a copy of the schematic!


Thank you for offering to send your sa-600 parts list. I would like to receive one.

The restoration you did was phenomenal - it must have sounded terrific after all yur work.

Email to: [email protected]

Many thanks.

Cheers - Bill
Williamsburg, VA USA

jan_slagman
07-17-2011, 04:00 AM
Thank you for offering to send your sa-600 parts list. I would like to receive one.

The resotration you did was phenomenal - it must have sounded terrific after all yur work.

Email to: [email protected]

Many thanks.

Cheers - Bill
Williamsburg, VA USA

Bill mailed me and i have sent him the JBL SA-600 parts list

Kind regards,

Jan Slagman
The Netherlands

jan_slagman
12-11-2011, 06:46 AM
Hello,

A fellow member named Isak Johannessen from Norway asked me for a JBL SA600 parts list by mail, but everytime i try to answer his mail i become this answer in the Norwegian language:
Leveringen mislyktes til disse mottakerne eller distribusjonslistene:

Can anyone tell me how to reach this Norwegian member ?

With kind regards,

Jan Slagman
The Netherlands

Lee in Montreal
12-11-2011, 07:46 AM
" Delivery failed to these recipients or distribution lists" :(

Does he work at VintageAudio? If so, he is on Facebook or at [email protected]

jan_slagman
12-11-2011, 09:31 AM
" Delivery failed to these recipients or distribution lists" :(

Does he work at VintageAudio? If so, he is on Facebook or at [email protected]

Hello Lee,

Thanks for your input. I'm not quiete sure if this is the man im looking for, but i'll give it a try and send him a mail.

With kind regards,

Jan Slagman
The Netherlands.

IsakAlexander
01-02-2012, 12:08 PM
Started a new tread over at diyaudio:
http://www.diyaudio.com/forums/solid-state/203639-restoring-jbl-sa-600-a.html#post2843634

Any comments/advice appreciated

basy69
02-16-2013, 12:03 PM
I thank you for offering to send the parts list.
I like to receive it.

Vriendelijk dank voor het aanbieden van de Onderdeel lijst van de SA-600.
Ik zou deze graag ontvangen. (Ik heb een SA-660, maar wellicht zijn veel onderdelen identiek)

Hartelijke groet,
Best Regards,
Arnoud Kramer
from The Netherlands, living in Skopje
-------

Bill mailed me and i have sent him the JBL SA-600 parts list

Kind regards,

Jan Slagman
The Netherlands

Woofer
02-17-2013, 11:30 PM
Is there any chance this 'parts list' can be posted?

:blink:

basy69
02-22-2013, 10:18 AM
I would like to receive the spare-parts-list.
Sorry I forgot to mention my email-address,
here it is: [email protected]
Best Regards,
Arnoud Kramer
-------

I thank you for offering to send the parts list.
I like to receive it.

Vriendelijk dank voor het aanbieden van de Onderdeel lijst van de SA-600.
Ik zou deze graag ontvangen. (Ik heb een SA-660, maar wellicht zijn veel onderdelen identiek)

Hartelijke groet,
Best Regards,
Arnoud Kramer
from The Netherlands, living in Skopje
-------

jan_slagman
04-21-2013, 10:59 AM
Is there any chance this 'parts list' can be posted?

:blink:
Well, there you are :)
Elco’s JBL SA-600


a= axial (Vishay 2222 021)
r=radial
xxx/xx= microfarads/volts Note: stuks means pieces

Poweramplifiers:

numbers original replaced by

C 1, 51 2 stuks a 2/25 a 2,2/63
C 4, 54 2 stuks a 125/10 a 220/25
C 5, 55 2 stuks a 80/25 a 100/25
C 6, 56 2 stuks a 250/64 a 220/63
C 8, 58 2 stuks a 160/64 a 220/63

Powersupply:

C 101, 102, 4 stuks r 4500/40 r 4700/40 (Vishay 2222 058)
103, 104
C 105, 106, 107,
108, 109, 110 6 stuks a 1000/6 a 1000/16
C 301 1 stuks (duo) r 2x1000/35 2 stuks r 1000/35 (Vishay 2222 037).

Pre-amplifier:

C 101, 201 2 stuks a 160/25 a 220/25
C 102, 112, 117,
202, 212, 217 6 stuks a 25/25 a 47/25
C 103, 116, 123,
203, 216, 223 6 stuks a 20/25a 22/25
C 104, 204 2 stuks a 125/10 a 220/25
C 105, 205 2 stuks a 35/3 a 47/25
C 109, 114, 115,
121, 124, 125,
209, 214, 215,
221, 224, 225 12 stuks a 10/25 a 10/63
C 110, 210 2 stuks a 1/15 a 1/63

Total:

4 stuks r 4700/40
2 stuks r 1000/35
6 stuks a 1000/16
4 stuks a 220/63
6 stuks a 220/25
2 stuks a 100/25
8 stuks a 47/25
6 stuks a 22/25
12 stuks a 10/63
2 stuks a 2,2/63
2 stuks a 1/63


The small signaltransistors of the JBL SA600:
Alternatives for Q 101, Q 201; Q 103, Q 203, Q 104, Q 204, Q 105, Q 205, Q 107, Q 206 Q 108, Q 208 (NPN) f.i. BC109C, BC 184, 2N5827
Alternatives for Q 102, Q 202, Q 106 and Q 206 (PNP) f.i. BC550, BC558C, 2N6003

There are more transistors which can be used as long as you use low noise types and the Vce0 isn't lower than 30 Volts. Ofcourse the pinconfiguration has to be suitable or you have to make it suitable by twisting the connections

Greetz, Jan Slagman

Woofer
04-21-2013, 11:04 AM
Thank you Jan most sincerely....

Cheers lots,
George. :)

Ananda
07-17-2013, 02:04 AM
Hello JBL SA-600 owners,

Since the restoration of my JBL SA-600 i get requests from all over the world for technical support.
I have discussed this matter with my fellow-technician Mr.Ruud Janssen and he decided to make a list of a of the parts he replaced to restore the JBL SA-600 amplifier.
The official JBL plan only mentions JBL factorynumbers.

Anyone who wants to receive this list list can drop me a line.

Kind regards,

Jan Slagman
Holland.

Dear,

Please send the parts list to me.

Also the Volume control data ( Resistance to the Tapping from zero volume point).

Kind Regards,
Ananda.
<[email protected]>

Woofer
12-21-2013, 07:52 PM
Hello Jan,

If you're still out there, I have just one question.

The Pilot Lamp...... Did you replace yours or did you keep the original?
The reason I ask, is because mine has just blown.
Now, according to the schematics parts list, it should be a GE 1820 (28V), but the one pulled from mine is a GE 1835 (55V).
Using an incandescent at half power is what I think gave it a distinct orange glow, which suited the amp, having orange behind the switches like it does.
You'd think that these little lamps would be easy to come by down here in Australia, but they're not.... :(
Anyway, may have to get them online ex-US, so I'm hoping I'm getting the right one. ;)

George.

jan_slagman
05-19-2016, 07:48 AM
Well, there you are :)
Elco’s JBL SA-600


a= axial (Vishay 2222 021)
r=radial
xxx/xx= microfarads/volts Note: stuks means pieces

Poweramplifiers:

numbers original replaced by

C 1, 51 2 stuks a 2/25 a 2,2/63
C 4, 54 2 stuks a 125/10 a 220/25
C 5, 55 2 stuks a 80/25 a 100/25
C 6, 56 2 stuks a 250/64 a 220/63
C 8, 58 2 stuks a 160/64 a 220/63

Powersupply:

C 101, 102, 4 stuks r 4500/40 r 4700/40 (Vishay 2222 058)
103, 104
C 105, 106, 107,
108, 109, 110 6 stuks a 1000/6 a 1000/16
C 301 1 stuks (duo) r 2x1000/35 2 stuks r 1000/35 (Vishay 2222 037).

Pre-amplifier:

C 101, 201 2 stuks a 160/25 a 220/25
C 102, 112, 117,
202, 212, 217 6 stuks a 25/25 a 47/25
C 103, 116, 123,

203, 216, 223 6 stuks a 20/25a 22/25
C 104, 204 2 stuks a 125/10 a 220/25
C 105, 205 2 stuks a 35/3 a 47/25
C 109, 114, 115,
121, 124, 125,
209, 214, 215,
221, 224, 225 12 stuks a 10/25 a 10/63
C 110, 210 2 stuks a 1/15 a 1/63

Total:

4 stuks r 4700/40
2 stuks r 1000/35
6 stuks a 1000/16
4 stuks a 220/63
6 stuks a 220/25
2 stuks a 100/25
8 stuks a 47/25
6 stuks a 22/25
12 stuks a 10/63
2 stuks a 2,2/63
2 stuks a 1/63


The small signaltransistors of the JBL SA600:
Alternatives for Q 101, Q 201; Q 103, Q 203, Q 104, Q 204, Q 105, Q 205, Q 107, Q 206 Q 108, Q 208 (NPN) f.i. BC109C, BC 184, 2N5827
Alternatives for Q 102, Q 202, Q 106 and Q 206 (PNP) f.i. BC550, BC558C, 2N6003

There are more transistors which can be used as long as you use low noise types and the Vce0 isn't lower than 30 Volts. Ofcourse the pinconfiguration has to be suitable or you have to make it suitable by twisting the connections

Greetz, Jan Slagman

Addition: For the powersupply you better use 10000uF/40v instead of 4700uF/40v, although 4700/40v would be sufficiant !!!