View Full Version : Voice-coil rubbing: possible fix?
I have a 2204H. The unit works, but has developed a voice-coil rubbing. On normal music/levels this is not noticeable - but it is definitely there: easily detected on a 30 Hz test tone, and when moving the cone by hand.
Is it - by any means - possible to fix this (apart from a new (and expensive) recone job)?
11-18-2009, 01:37 PM
Maybe yes, maybe no.
If the voice coil is blistered excessive heating of the voice coil windings = No.
If there is some bit of magnetic little stuff in the gap that can gotten out by melting out the cone and "reconing" then = maybe yes.
if the glue joint is failing around the spider and can be reglued = yes.
If the surround is starting to tear loose from the "paper" cone and can be re-glued = maybe yes.
Using a 2204 12" driver for 30hz seems a bit low for me. Try the 40hz high pass filter button.
That has been my experience.
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.