PDA

View Full Version : L-166 Fried Lpad... Questions



Highfilms
10-23-2009, 05:19 PM
I just picked up a pair of L-166's and after tracing down a non-functioning mid - it turns out the mid is good but the lpad for the Presence Nob is literally fried on the inside. My question, before sticking a replacement in there, is why or what could cause it to short like that, and what else should I check?

And also, where can I find a suitable replacement?

Thanks.

Highfilms
10-23-2009, 05:47 PM
I took a few pics to add to the description. I hope this helps.
Thanks.

Ehttp://www.highfilms.com/jbl/1.jpg
http://www.highfilms.com/jbl/2.jpg
http://www.highfilms.com/jbl/3.jpg

Beowulf57
10-24-2009, 05:36 AM
A voltage was applied to the input terminals that should not have been...500 watts from a big power amp...hey let's plug it into a wall outlet and listen to 60 Hz hum...

Check the values from contact to contact on the other lpad and replace with a similar 8 ohm model.

Highfilms
10-25-2009, 01:04 PM
I found a new 70's Lpad replacement.

Wow these things sound fabulous!

I am in the process of cleaning them up. Will post pics.

Thanks for the reply post.

E