View Full Version : Have LE15A's & LE85 horns - need a cabinet design
mchristiansen
10-22-2009, 05:43 PM
Years ago I traded for the following JBL components. I have 2X LE15A's, with PR15 passive radiators, 2X LE85 horns with LX5 crossovers. I'm looking for a cabinet design that is compact (for 15's) and is effecient and give me good base response. Will power with a Hafler 9180 (100 watts pc).
Is there a speaker design out there that we can build here in Seattle.
Thanks for the input.
Marc
Mr. Widget
10-22-2009, 11:38 PM
This guide gives good basic info as well as specific tuning info for your woofers. You will need to build enclosure #8 for your S7 system.
http://www.jblpro.com/pub/manuals/enclgde.pdf
I'd recommend you not use the passive radiators to get the best performance and most compact cabinets.
You should also read up on lans-a-loy surrounds.
Widget
Beowulf57
10-23-2009, 05:37 AM
Also check here (page 5, etc.): http://www.lansingheritage.org/html/jbl/plans/1970s-kit.htm
jcrobso
10-23-2009, 08:01 AM
In addition to much bigger, about 8 cubic ft. if I remember correctly.
mchristiansen
10-23-2009, 08:21 AM
Thanks everyone for the comments and suggestions. Will read up and do some exploring. Will report back...
Cheers from Seattle,
Marc
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.