PDA

View Full Version : The infamous DX-1 Active Crossover



AlpineIceMan
09-29-2009, 09:13 PM
Here are some pictures of my DX-1. I'm desperately looking for some new new gold plated dual horizontal rca circuit board mount connectors. Can anyone help me locate a source for these? please help as I have a pristeen set of Black laquer XPL-200's that I have bi-amped with a couple of yamaha MX-1000's.

Robh3606
09-30-2009, 07:42 AM
Is there an IC instaled in your Low Frequency card??

Rob:)

AlpineIceMan
09-30-2009, 07:08 PM
Here you go. Any thoughts on a source for the input jacks? I know the second picture is not so good, but insignificant as the traces can be seen below.. :)

Robh3606
09-30-2009, 07:21 PM
Any thoughts on a source for the input jacks?

Sorry no. What's wrong with the ones already there? I was curious to see if you had the right cards. There have been a few DX-1's arround and not always with the correct cards for the speakers they were purchased to work with.

Rob:)

Don C
10-01-2009, 02:24 PM
Will any of these work?
http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=rca+jack+pc+mount+dual&_sacat=See-All-Categories

AlpineIceMan
10-01-2009, 07:28 PM
Unfortunately not. I have found this sight http://www.rapidconn.com/rca.html
and the RC2-7A1 looks to fit the ticket, but this company will only sell in lots of 3000+. I asked if they could direct me to a distributor and have not received a reply yet. :(

klipschfool
12-28-2009, 10:01 AM
tow links below. I have a klipsch subwoofer that needs the RCA jack replaced. i found these two places.

http://www.futurlec.com/Plugs-RCA.shtml

http://cgi.ebay.com/Lot-20-dual-vertical-pc-mount-RCA-phono-jacks_W0QQitemZ270331361462QQcmdZViewItemQQptZLH_D efaultDomain_0?hash=item3ef10138b6

Apogee
01-20-2010, 06:09 AM
Why not just install Cardas connectors and dump the original jacks?

http://www.cardas.com/content.php?area=oem&pagestring2=Female%20RCAs&pagestring=Female%20RCAs+%28closeup%29&content_id=6&part_id=36

Just a thought as that's what's I'd do.

Regards,

Steve