what horn goes with a JBL 435AL-I

[dwight8]

what horn would i use for a jbl 435AL-I

[frank23]

what horn would i use for a jbl 435AL-I

I'd suggest searching this forum for horns that were used with the 2431 (the pro version of the 435AL) and 2435 (pro version of the 435BE), there is very very extensive information to be found.

[dwight8]

is there a jbl horn for the 435a and any one know how much and where?the 435a is 3" and the 2431 is 2"

[pos]

Mybe you are talking about the 435-ML
http://www.telemarket.fr/dynv6/produit/932191.shtml

:dont-know

[frank23]

Mybe you are talking about the 435-ML
http://www.telemarket.fr/dynv6/produit/932191.shtml

:dont-know

actually, I like Thai Kitchen, I often cook using ingredients from this brand

on topic, the 2431 , 2435 , 435AL, 435 BE share the same magnet, so they are all 1.5" exit drivers with different diaphragms, backs and ferrofluids

[Robh3606]

on topic, the 2431 , 2435 , 435AL, 435 BE share the same magnet, so they are all 1.5" exit drivers with different diaphragms, backs and ferrofluids

They only "real" difference is the use of coated diaphrams in the consumer models. The Ferro is the same in all units and the difference in back caps has been shown to be cosmetic as measurements could did not show any real differences between the 2 sets of drivers.

Rob:)

[4313B]

the difference in back caps has been shown to be cosmeticSomeone needs to fill them with fluid and see if they really are equivalent. I should have done it when I had a ton of 2435's on the bench.