PDA

View Full Version : help please identify cabinet enclosures



marine6072
07-23-2009, 11:17 AM
can someone please advise me as to identify these cabinets id like to sell them and dont want to misrepresent them

robertbartsch
07-23-2009, 03:22 PM
Looks like the drivers are not the original for these cabs but I could be wrong. Anyway, the 15" woofers appear to be Altec model 416s to me. If you take the woofer caps off you could confirm this.

Value is based on condition. If the 416s are original they should bring at least $125 per unit or more, I suppose.

marine6072
07-23-2009, 05:36 PM
yes i suspected that i was looking to identify the cabinet so i could sell it seperate from the speaker which is a 415c according to the altec stick on front do you suppose this may have been a valencia cabinet made with three speaker option rather than the normal two speaker design ive seen
thank you again for your imput

robertbartsch
07-23-2009, 06:03 PM
The cab looks in good shape but it probably cant be shipped easily so you need to sell it locally. I assume it would go for under $50, I suppose.

Goodwill_HiFi
07-23-2009, 09:22 PM
It looks like the "builder" took the decal off the back of the 415 and stuck it to the front of the cabinet.

doodlebug
07-24-2009, 05:16 AM
Looks like a nice cabinet from one of the 3rd party suppliers for such back in the day. Clearly, these weren't assembled by a dealer, however, judging by the hack job of installation and wiring.

I'd suspect DIY and experimentation....

Cheers,

David