i have acrazy JBL and i dont know tere model

[eranxx]

i have acrazy JBL and i dont know tere model

someone can help me?
i have apicture of them.
there size is
height 108
depth 62
width 69
they are good speakers? and what year thay made?and how mach thay cost?
thank you vere much for your answer and i am sory for my bad english.

[demon]

hello eranxx, and welcome to the board.

im sorry i cant help you with your system, only thing i can tell for sure is that the tweeter used on your speakers is not a jbl, but very likely from electro voice. as seen here on the EV patrician (http://www.audioheritage.org/images/misc/ev/EVBrochure_11.jpg).

how do you like these speakers? crazy? id say they dont look that crazy, but rather very reasonable!
wich is big.
please tell us something about them.

:)

cheers,
mikey

[JBL 4645]

What the lens on top of the speaker I’m sure that says JBL or is the JBL professional logo. Thou it is bit blurred and distant on the picture.

Whoa bugger! You need to look closer at the bass mid drivers! Foam is cowed up all around each bass driver.

It looks like edge foam as gone thou it could be the gasket around the edge of the bass driver? If only the picture was bit more decent. It looks like camera phone?

[hjames]

What the lens on top of the speaker I’m sure that says JBL or is the JBL professional logo.
Whoa bugger! You need to look closer at the bass mid drivers! Foam is cowed up all around each bass driver.


Whoa, buggery boy - looks like some kinder custom collection of drivers and stuff - specially with the lenses sitting wrong like that!

We can see its a JBL 2308 lens, guess that its a matching JBL horn (2307?), and it may even be a JBL woofer ... (Not a bass-Mid driver!)

But the cabinet??
Home brew kit, I'd say - if not by the current owner, then by a previous owner (or built for hire).


But its not quite right ... ...


You see, normally the ring end of the horn is mounted against the INSIDE face of the baffleboard, not against the outside like this one is ...
and with it against the inside face, the lip (end of the horn) usually winds up being flush against the face, so you don't need spacers to hold the lenses proud of the baffleboard.
Also, where is the port? it looks somewhat like a big 2 way with that horn added on the top ... think 4320/L200, etc ...
but those speakers would have a port or two.

[eranxx]

hay Thank you for your answer!!
here is the element of this speakers
Electro-Voice ST-350 (http://www.vintage-audio.com.ua/en/cat/163/580.html)
JBL Model 2307 Horn (http://cgi.ebay.com/JBL-Model-2307-Horn-(Single)-Professional-Series_W0QQitemZ320386155754QQcmdZViewItemQQimsxZ2 0090619?IMSfp=TL090619184002r27347)
JBL 2215 15" Driver (http://warehousesound.com.au/jbl2215.htm)
good alamant??
can someone teel me about this element something ?
i see that inside the speakers thay have 4 Crossovers....
by the way threr weight is 100k{each }

[midlife]

Do the individual speakers work and do, collectively, they sound go? Do you like them?