buzzandrox
06-03-2004, 01:46 AM
After reading the comments about the 250Ti versus the 240Ti, I am wondering if is is possible (or sensible) to attempt the following...
Take a pair of 240Ti's
Construct an enclosure (x2) to mount the 108H in which will sit on top of the current 240Ti cabinets.
Construct two cross overs as per 250Ti spec.
Rewire as required.
Will this give a worthwhile result ?
Thanks in advance.
Take a pair of 240Ti's
Construct an enclosure (x2) to mount the 108H in which will sit on top of the current 240Ti cabinets.
Construct two cross overs as per 250Ti spec.
Rewire as required.
Will this give a worthwhile result ?
Thanks in advance.