View Full Version : 902-16b vs 902-16hf
baldrick
05-10-2009, 05:54 AM
Is 902-16b and the driver in 902-16hf (http://www.hifido.co.jp/KW/G0205/J/0-10/C08-36199-15532-00)the same driver or is there a difference between them?
Earl K
05-10-2009, 06:10 AM
Hi,
Cute horn !
http://www.hifido.co.jp/photo/08/155/15532/f.jpg
Is 902-16b and the driver in 902-16hf (http://www.hifido.co.jp/KW/G0205/J/0-10/C08-36199-15532-00)the same driver or is there a difference between them?
- It'll be the same driver body as any 902 /though perhaps a different "lighter" diaphragm was once used to get a bit more UHF.
- It's all a "moot point" though / since you need new diaphragms for the ones you presently own and GPA only sell the two versions of the softer aluminum diaphragm . One version is 8 ohms & the other is 16 ohms.
- I suggest buying the 8 ohm type. This will allow your tweeters to pull more current from your amp and therefore be "louder" in relation to your midrange drivers .
- IMO, you should be using 288s below these 902s . Spend the money & buy some 288-8H(s) from GPA .
>< cheers :)
http://www.hifido.co.jp/photo/08/155/15532/c.jpg
baldrick
05-10-2009, 06:49 AM
But 288 will not fit my MR994!? Is the 288 much better than the 908?
The thing with the 902b is that I will get a pair of working 902b with some A8s :bouncy:
Earl K
05-10-2009, 07:20 AM
But 288 will not fit my MR994!? Is the 288 much better than the 908?
The thing with the 902b is that I will get a pair of working 902b with some A8s :bouncy:
Who cares! Spend more money ! Buy drivers & horns ! :p
You must embrace your "duty" to ; Help refloat the global economy ! ;)
Seriously, the 288 has much better midrange than the smaller 802 or 902 ( comparing them on relative horn sizes ) .
:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.