XPL200A in SoCal to measure box size?

[andresohc]

I am considering building the box for my XPL200As clone as close to original as possible, but havent seen one to measure. I know it will be a major task in that it is trapezoidal, but thought I might look at a pair first and get some measurements and see how big a task it would be.
Is there anyone in southern California (I am in Orange County) that has a pair that would be willing to let me take a look at, take some photos and measurements? (I need to look at the baffle and see if it can be built in MDF, also I wanted to check radii on the edges, the angles of the tapers, distances between the baffle speaker element placements etc).

[4313B]

Perhaps Jim Henderson can help. I believe he is in OC and has a pair.

[Don C]

Is there a difference in the cabinets between 200 and 200A?

[Robh3606]

I would love to see that too! I took the easy road and went my own way rather than try to copy the stock cabinet. What I did for driver spacing was get a couple off good head on shots, drop them in Paint Shop Pro and use a driver to scale it and get the dimensions.