PDA

View Full Version : L100T components?



johnaec
05-31-2004, 03:25 PM
OK - I believe the L100T contains the 2214 12" and 104H-2 mid, correct? But what about the HF? Is that some version of an 044 or some derivitave? I'm debating on picking up a local pair that's pretty beat up, (need new surrounds), and am wondering if it's worth it. They'd just be sitting in my garage as a future project for fun...

Thanks for any info!

John

boputnam
05-31-2004, 03:47 PM
Hey, John...

I don't know it personally (what a surprise!! :eek: ), but here's some things a Search found:

http://audioheritage.csdco.com/vbulletin/showthread.php?s=&threadid=2383&highlight=l100t

http://audioheritage.csdco.com/vbulletin/showthread.php?s=&threadid=1974&highlight=l100t

And, as originally posted by the one Giskard...

johnaec
05-31-2004, 03:58 PM
Thanks Bo! I did a search but missed those. 035...hmmm. I wonder how those would sound in place of the 033 (?) in my L150s...

John

johnaec
05-31-2004, 04:03 PM
Well, they just went above my max bid of $86.51 - any more than that it it goes past "fun" in my case...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5701578466&ssPageName=STRK:MEWA:IT

boputnam
05-31-2004, 04:13 PM
Originally posted by johnaec
I did a search but missed those. Yea, often, me too. I've lately decided to Search for "????" by "Giskard", and it thins-out all the riffraff... ;)

andresohc
05-31-2004, 08:53 PM
Heh Bo, missed this auction again. My computer couldnt switch from playing "Sleeping Beauty" DVD to bidding in time and brain flatulated. Should have followed your sage advice :( . Too bad, I needed what was left of those 2214H-1s. Oh well, I think I have another source.
John there are several ebay auctions up for those, the most promising one I see is
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5702316444&ssPageName=STRK:MEWA:IT
good luck.

johnaec
06-01-2004, 05:48 AM
Yeah - even at the $99 that set went for, they were a good deal. (I noticed you were the first one up with a bid.) I also noticed the other auction you mentioned, but the 035s aren't a big enough deal to me to get into a bidding war over...

John

4313B
06-01-2004, 06:18 AM
Originally posted by johnaec
I wonder how those would sound in place of the 033 (?) in my L150s...

John Significantly flatter with significantly greater bandwidth. In reality, you might like them and you might not.

4313B
06-01-2004, 06:32 AM
The 035TiA is in stock.
The 2214H is in stock.
The 2214H-1 is in stock.

None of them are nice and cheap any longer. Stock must be getting low. :p

Don C
06-01-2004, 07:20 AM
052Ti seems to still be reasonable.

andresohc
06-01-2004, 12:13 PM
Glad i missed this, I just picked up what will hopefully be decent 2214Hs for 50 dollars minus the surrounds. At least a good core price if nothing else, as long as someone hasnt tried to use them as planters or a hammer:rolleyes: . 146 to recone at OCS still probably less then new cost. Almost procurred all my parts for my XPL200As:D

4313B
06-01-2004, 12:46 PM
Yep, 046Ti-1's are on the way. Did you get the 115H-1's?

Guido
06-01-2004, 01:20 PM
Originally posted by Giskard
The 035TiA is in stock.
The 2214H is in stock.
The 2214H-1 is in stock.

None of them are nice and cheap any longer. Stock must be getting low. :p

What the hell is now the difference between a 2214H and a 2214H-1 :confused:

White cone with black aquaplas, black cone with white.....:blah: :blah:

andresohc
06-01-2004, 01:27 PM
I got a nice pair of 115h not 115h-1. They need re-surround but otherwise are perfect. Also have one recone kit for 115H-1, but dang I hate ripping out nice cones. Giskard, would you recone these as 115H-1, Is the difference significant enough. Same for 2214Hs, They arent the 2214H-1 (as far as they know). For the XPL project would you recone both?

4313B
06-01-2004, 04:19 PM
The 115H uses the aquaplas cone and 115H-1 uses the polyfill cone. I don't believe the 115H will "work" in an XPL200.

Neither are supported by Pro or Consumer any longer. If you need a second 115H-1 kit you will have to get one from a Service Center that still has stock. The 115H will take the 115H-1 kit.

The following systems are affected:

L15
4401
L20T
L20t3
18Ti
4406
XPL90
XPL200


*****

Consumer does have some aquaplas C8R115 kits left for those with L15 or 4401 systems.

johnaec
06-04-2004, 04:27 PM
Hey Bo, (or anyone) - I appreciate that diagram posted for the L100T but does anyone have the same for the L100T3? I did a search and couldn't find anything. I'm primarily interested in the differences between the crossovers.

Thanks for any info - John

Don C
06-04-2004, 05:10 PM
Here:

johnaec
06-04-2004, 06:01 PM
Thanks Don! :thmbsup:

Edit: Boy, are those the scans from JBL? I've noticed they've scanned a lot of their older stuff at such low resolution you can't read some of the numbers. The L100T3 looks pretty close to the L100T crossover - I've got a bid in on both, and if they go cheap enough, maybe I'll be able to compare in person...(home brew setup). Either one is probably close enough for my needs.

BTW - I'd be more than happy to do higher res scans for anyone, if the need arises...

Thanks again - John

jarrods
11-14-2004, 01:02 AM
The 035TiA is in stock.
The 2214H is in stock.
The 2214H-1 is in stock.

None of them are nice and cheap any longer. Stock must be getting low. :p

Anyone know if the 2214H still a stock item now? some 9 months on.... prices??

jarrod

4313B
11-14-2004, 01:10 AM
http://www.jblproservice.com/pdf/Transducer%20List/04%20Transducer%20List.pdf

spirou38
11-14-2004, 02:56 AM
Hi Giskard,

That is not the subject of that post, but bad surprise, I can't see the 2405 in the pricelist :( . Is it discontinued :confused: .

Pascal

4313B
11-14-2004, 06:25 AM
Not yet. JBL ran a new batch recently. This price list it like pretty much any other JBL document - don't take it as the be-all end-all.