PDA

View Full Version : 2482 w/2350 or 2360a?



casuall
02-16-2009, 03:31 PM
This is my first post.I was strictly a Klipsch guy.I ended up getting 2 21" Tekton drivers that I had housed in 2 12 cu ft. cabs.I was originally using the Tektons as subs with the main speakers being Khorns.The Khorns were a dissapointment to me.So,to make a long story short,I got a pair of 2482's w/2350 horns.I have a chance to get a pair of 2360a's.First,will the 2360a's match up?Secondly,does anyone have an opinion on either.It seems that from what I read,he wave harns(2360a's)make the driver more effecient(more db.'s).I'm planning on putting the horns on top of the Tektons & use a pair of Fostex T90a's or T900a's for tweeters.Any & all suggestions are greatly appreciated.Tim.

jerv
02-17-2009, 12:21 AM
I have no experience with the 2482 drivers, but 2360 are great horns. Among other threads, check out this one:
http://www.audioheritage.org/vbulletin/showthread.php?t=21283

Allanvh5150
02-17-2009, 10:42 PM
The 2482 is a great driver but do you realise that it only goes up to 6Kz max?

jbl4ever
02-19-2009, 02:02 AM
Here is a link to the 2482 driver. I use it to 4.6 to 4.8K on 2360's
http://www.jblpro.com/pub/obsolete/2482.pdf
Here is a picture of my pair
http://audioheritage.org/vbulletin/showthread.php?t=16114
Also a link to the 2350 horns
http://www.jblpro.com/pub/obsolete/Radial_Horns1.pdf
Hope this helps:)

CauYem
02-25-2009, 02:22 PM
I moded my Khorns with a set of JBL 2482/2350 & Fostex T90. Xover at 600Hz & 3.5 KHz. I had L-Pads on Mid & Hi, then replaced them & Tee-Pad using resistors. The back of my Khorns bass bins are closed (same as the 60th Anniversary Khorns).

Mid (2482/2350) & Hi (T90) sound wonderful, but Khorns bass isn't fast & tight as my Pseudo-L300 (L200 + 077). I'm very disappointed with the Khorns. I'll move the 2482/2350 & T90 combination to my JBL 4520 loaded with JBL 2226H after I build the new crossover (500Hz and 4.2 KHz) to utilize the full BW of the JBL 2482.