PDA

View Full Version : Wiring the 3107 crossovers in 4350



neanderthal
12-04-2008, 06:44 PM
I have a wiring diagram but it isn't clear enough to see which is positive and negating on the drivers.All Iam asking for is for someone to bail me out with a clear diagram to confirm what I think is correct:

2405 orange to+ and orange with black to -
2440 yellow to + and yellow with black to - or opposite on this
2202A white to + and back to -

There is a red and black with male spades that Iam assuming conncts to the back and is power in with red+ and black-
Thanks in advance for the bail out on this

Robh3606
12-04-2008, 07:12 PM
Here's have I have. I think your are correct about the spades. The rest should be easy enough figure the 2405 is connected to the Pot

Rob:)

neanderthal
12-04-2008, 09:29 PM
Here's have I have. I think your are correct about the spades. The rest should be easy enough figure the 2405 is connected to the Pot

Rob:)

I had that same diagram but I can read the one you posted and the one I have I couldn't see the positive or negative on the 2405's and 2440's.I also thought it was posted on here some time back (I couldn't find it) that the 2440 is wired backwards 180 degrees out of phase I believe how it was stated.

4313B
12-05-2008, 06:44 AM
it was posted on here some time back (I couldn't find it) that the 2440 is wired backwards 180 degrees out of phase I believe how it was stated.Yes.